Reduce equipment downtime with six practical steps. A goal of recovering 10 hours per month at $250 per hour after variable production costs could provide $2,500 gross, or $1,900 net after $600 added maintenance, if customer demand exists. Illustrative example.

By ClarityShaping

What is downtime and how can a manufacturing leader reduce it? This article explores what manufacturing equipment and process downtime is, when it should be reduced, and why. Then we dig into reasons why work is stopping (downtime), how to prioritize changes, and how to assign corrective actions to the largest controllable causes. We follow one example plant leader as he identifies an operating problem, performs a baseline review, identifies a remedy to increase machine productivity time, completes a test, and then checks the business result. Our plant leader’s goal is the following:

  • Recover 10 downtime hours per month to create a potential production opportunity.
  • With a $250 hourly production value after variable production costs, the possible gross monthly benefit is $2,500.
  • Account for the additional $600 monthly maintenance expense, for a prospective net benefit of $1,900.

In our manufacturing plant, downtime is when the manufacturing equipment and processes break down. Recovery involves several activities that can add delays: noticing the failure, contacting help, diagnosing it, obtaining a part, completing repair, and approving restart. If a plant leader labels the downtime as a maintenance issue, the full problem is unlikely to get resolved as the maintenance team may only have control over some of the downtime activities. To correctly identify the causes and delays and reduce equipment downtime, the plant leader should track all aspects of the equipment downtime over a period of time. This reduces the chance that a plant floor or decision delay gets incorrectly labeled as a slow repair. By identifying equipment downtime causes and delays, a plant leader can often reduce machine recovery time by improving readiness and escalation processes, rather than immediately investing in new equipment or technology. This is proactive rather than reactive maintenance.

Proactive maintenance: preventive tasks vs condition monitoring

Research helps explain why proactive maintenance is worth testing. Thomas and Weiss’s 2021 maintenance survey analysis links less reliance on reactive maintenance with lower unplanned downtime. The survey shows a relationship, not a promised reduction for an individual plant. Lean Enterprise Institute’s explanation of andon describes how visible signals summon a quick response to problems, supporting quicker response and attention to quality problems. Each plant and type of equipment will vary in the type of proactive maintenance needed.

  1. Time-based preventive tasks are useful when equipment degradation relates to time or cycles.
  2. Condition monitoring is more useful when a measurable warning develops before failure.
  3. A noncritical, inexpensive item may justify a different policy from a machine whose failure stops the only profitable route.

Plant leaders should make that judgment jointly with maintenance and engineering teams using documented failure history, consequence impact, and ability to detect failures. Do not jump to the conclusion that adding sensors to every machine will solve the problem. Without a response plan when the sensor identifies an issue, the sensor will only create an expensive stream of alarms that nobody has time to investigate. How to identify the problem and set up proactive maintenance? The steps below guide the plant leader through this process.

1. Define the baseline before any changes

Before making any changes, document all downtime-related activities that occur when equipment failure happens today, and the maintenance readiness plan currently in effect. If this is not known or established, then start by measuring the time spent on each equipment downtime activity and define what (if any) maintenance readiness steps happen today. Do not make any changes without identifying and measuring baseline data first. The initial baseline review should establish at a minimum:

  • Product scope (the product and related products)
  • Start and finish boundaries
  • Counts
  • Elapsed time
  • Expense records related to the current result, including defect and downtime exceptions
  • Customer requirements
  • Necessary operating conditions

In our manufacturing plant example, the plant leader recorded 10 unplanned downtime hours per month over a couple months of data collection. Each downtime started with equipment failure, but on average an hour passed from when the equipment failed to when leadership was notified. There was an additional delay as the teams diagnosed the failure and then time waiting on the replacement part. The repair itself only took half an hour on average, but then additional time passed before the equipment was approved to restart. Once baseline data gathering is complete, then the plant leader should create a test for change.

2. Create a test for change

Now that the plant leader has identified and measured the baseline, it’s time to create a test for change. That includes figuring out what could change, what should change, and what should not change. Then plan which scenarios to compare in a controlled trial. Plan out what and how to change before starting to make changes. The list below helps create the test for change.

  • Define what counts as an equipment downtime cause or delay
  • Record the machine, product, start, finish and reason
  • Rank causes by total lost minutes
  • Identify failures that repeat
  • Keep essential replacement parts available before they are needed
  • Prepare authorized maintenance tasks
  • Ensure operators perform approved equipment condition checks
  • Plan preventive maintenance to address the specific failure
  • Assign an owner for the corrective action
  • Confirm that the equipment is producing acceptable-quality output again after the change

Continuing the manufacturing plant example, the plant leader identified which spare parts to keep on hand for a quick maintenance turnaround and preauthorized known fixes. The plant leader also defined a new preventive equipment check with routine maintenance for the identified issue.

Pareto Analysis for decision making

When deciding what downtime causes and delays to count and which to test for change, include all possible causes and delays in the review. Start at the beginning with production loss and record all delays through authorized return to operation. Then classify each reason into a category. Keep unknown as a visible category instead of forcing guesses. Rank minutes as well as events: one large failure and many short interruptions require different interventions. In the example, waiting for parts and repeat jams can be addressed by different owners. Use these downtime categories to determine which of the “vital-few” high-impact factors should be part of the test for change, rather than the “trivial many” minor issues. The Pareto Analysis is a way to choose a test; it is not proof that a particular corrective action will work.

3. Test a change to the operating process

Time to make a change, but only one change at a time. Start with a top priority and high impact change, make the change, and verify results before starting with any additional changes.

Identify causes and delays

Start with two actions: agree on what counts as a downtime cause or delay, and record the start time, end time, machine, product, and reason. Record each part of the downtime event, rather than relying only on repair tickets.

Quantify the loss

Rank the causes by total minutes lost and identify failures that happen repeatedly. A frequent five-minute equipment downtime can have a greater impact than one unusual long breakdown.

Improve readiness

Be prepared with critical spare parts and approved maintenance tasks in advance. These actions reduce waiting without encouraging improvised repairs or bypassing safety safeguards.

Prevent recurrence

Use operator condition checks and scheduled preventive maintenance to help prevent the problem from returning. Train people only for tasks they are authorized to perform, and follow site isolation procedures.

Verify recovery

Assign an owner to address the cause and review good output after the fix. This confirms that the improvement is real and that the downtime has not simply moved to another station.

Cost-benefit for the manufacturing example

In the manufacturing plant example, the equipment downtime was determined to be 10 hours per month from baseline data gathering. The plant leader set out with the goal of recovering those 10 hours to bring an additional 10 hours of production capacity. That assumes customer demand exists for those 10 hours of additional productivity. If not, those 10 hours would be potential productivity but the plant leader would not see realized benefits until the customer demand scaled up to meet equipment and process capacity. In the example, the plant leader identified that each recovered production hour could provide $250 of value after variable production costs. Therefore, the potential benefit totals $2,500 monthly. The plant leader identified the new preventive maintenance routine would cost $600 monthly, which must be subtracted from the potential benefit amount. The full-recovery scenario is 10 additional production hours per month times the $250 hourly value after variable production costs, minus the $600 monthly maintenance cost, for a potential $1,900 net monthly benefit. This is the recovery goal, not a measured result. Partial recovery would produce a smaller benefit.

Illustrative full-recovery business case: 10 hours at $250, less $600 maintenance, gives a potential $1,900 net monthly benefit.
Figure 1. One illustrative manufacturing example. Recovering the full 10 monthly downtime hours at $250 per hour after variable production costs creates a potential $2,500 gross monthly benefit. Subtracting $600 in added monthly maintenance leaves a potential $1,900 net monthly benefit. Customer demand must exist, and actual recovery may be smaller.

4. Confirm the change

It is important to make sure the equipment downtime improvement plan holds up across different shifts, operators, and comparable production runs. Compare repeat downtime events per operating hour across similar product runs, not just total monthly downtime when volume changed. Track how much preventive work was actually completed and whether the equipment returned to acceptable condition. A clean two-day run is weak evidence for a failure that normally occurs once a month. Continue testing and reviewing the change with multiple failure opportunities and record the maintenance cost required to preserve the gain.

5. Verify the result and make it repeatable

Compare the results against the original baseline. Retain the records behind the result so another reviewer can reproduce the calculation. A favorable first run supports further testing; it does not establish causality or a lasting plant-wide result. The plant leader should include all business groups when reviewing the data and determining the cost-benefit results. Consider the following business groups and their role in overseeing this change.

  • Production confirms the same measurements and explains changes in demand, mix, and staffing.
  • Quality Control confirms acceptance requirements and checks whether rejects, repair or customer problems have shifted.
  • Finance distinguishes actual avoidable expense from capacity or time value and removes overlapping benefit claims.
  • The operating owner maintains instructions, checks the condition that supports the gain and responds when performance deteriorates.

6. Turn the recurring downtime into a focused next step

The example shows why recurring equipment downtime and insufficient maintenance readiness plans require a dedicated operating project and subsequent business change in order to recover productive machine time. The benefit becomes credible when the plant can connect the changed method with results and a defensible business calculation.

Now it’s your turn to choose one equipment or process downtime failure that your team can measure, test, change, and verify.

For manufacturing leaders in Charlotte and surrounding areas, a focused conversation with ClarityShaping can help define the problem, evaluate the evidence, and identify an appropriate next step.

Contact ClarityShaping

Six practical steps: define the baseline, create a test, test the change, confirm it, verify the result, and choose the next focused step.
Figure 2. The article’s six practical steps keep the same equipment problem in view, from recording the baseline through testing, confirmation, verification, and choosing the next focused improvement.

Manufacturing leader FAQs

Should we buy predictive maintenance software first?

No, start with your failure history, the consequence and your current response process. Identify how to quickly identify equipment failure and who can act on it. Test a process change and verify the results. Only then buy predictive maintenance software if the need is confirmed.

What should we bring to the first review?

Bring recent records for repeat failures and maintenance readiness, the current process, a representative example and the customer or business requirement being missed. Start with the raw counts and timestamps behind the summary. Agree which costs can genuinely change before converting an operating result into a financial forecast.

When is the change ready to expand?

Expand after comparable operating evidence supports the result, required quality and delivery conditions remain acceptable, and the operating owner can demonstrate the approved method. Include all affected shifts and relevant product variants. If the pilot misses its aim, revise the explanation or trial rather than extending the original savings assumption.

About the author

ClarityShaping brings Lean Six Sigma Black Belt credentials and 15+ years of Lean Six Sigma process improvement experience across government, banking, small business, and manufacturing.

Posted in , , , ,

Leave a Reply